Multifunctional Power Meter with LCD Display
SATEC PM135
Description
The PM135 is widely integrated in panel boards and SCADA systems. With the addition of the unique TOU module, the EH model answers the needs of revenue metering applications.
It is also suitable for utility substation automation with its support of the industry standard DNP 3.0, Modbus TCP/RTU and IEC 60870-5-101/104 protocols, as well as its I/O capabilities (using the Digital Input/Output modules).
The PM135 has a 3" × 2" (76mm × 49mm) backlit LCD display as well as SATEC's unique LED bar graph loading indicator.
Measurement and Communication
The PM135 accurately measures over 100 parameters from basic frequency, voltages and currents, to all power parameters, four quadrant active, reactive and apparent energies, harmonics and time of use (TOU).
The PM135 has an integral RS-485 communication port for a wide range of protocols — Modbus, DNP 3.0 and IEC 60870.
Its expansion module allows connection of a second communication port, including Ethernet, Profibus, RF or GPRS, as well as second RS-485/RS-232 port.
Applications
Models
-
PM135P
Power Version -
PM135E
Energy Only -
PM135EH
Energy & Harmonic Version
Plug-In Modules
Tech Specs
-
Multifunctional 3-Phase Power Meter
- True RMS volts, amps, power, power factor, neutral current, angles and unbalance for voltage and current, frequency, symmetrical components and many more
- Ampere/Volt demand meter
- 25, 50, 60 and 400 Hz measurements @ 3 decimal digit values
- 128 samples per cycle
-
Harmonic Analyzer (PM135EH)
- Individual voltage & current harmonic spectrum and harmonic angles up to 40th order harmonic
- Voltage and current THD, TDD and K-Factor
- Real-time “scope mode” waveform monitoring via PAS software
-
Billing / TOU Energy Meter
PM135E & PM135EH- Accuracy Class 0.5S (optional 0.2S) IEC 62053-22 and IEC 61557-12 (0.2)
- Four-quadrant active and reactive energy polyphase static meter
- Three-phase total and per phase energy measurements; active, reactive and apparent energy counters
- Time-of-Use, 4 totalization and tariff energy/demand registers x 8 tariffs, 4 seasons x 4 types of days, 8 tariff changes per day
- Easy programmable tariff calendar schedule
- Automatic daily energy and maximum demand profile log for total energy and tariff registers
-
Event And Data Recording
PM135E & PM135EH- Non-volatile memory for timestamped event and data recording: 48 days for 2 daily TOU records, half-hourly writing of 4 parameters and recording over 100 events during the entire period
- Event recorder for logging internal diagnostic events and setup changes
- Two data recorders; programmable data logs on a periodic basis; automatic daily energy log and maximum demand profile
-
Programmable Logical Controller
- Embedded programmable controller
- 16 control setpoints; programmable thresholds and delays
- Relay output control
- 1-cycle response time
-
Voltage And Current Options
- Direct Measurement: 0-690V AC
- 1A or 5A inputs from CT secondary
- 40mA input designed for SATEC HACS CTs (100-3000A options)
- RS: unique input for 5A rated HACS CT
-
Communication
- Built-in
- Standard 2-wire RS-485
- Optional interfaces (1 per device)
- ETH (10/100Base T)
- 2G/3G cellular modem
- Multipurpose RS-232/422/485
- PROFIBUS
- RF (certain regions only)
- Client - Modbus/TCP over ETH or 3G/4G
- TCP notification client for communicating events or periodic reports to remote server
- Expertpower client on subscription basis
- Communication protocols
- Modbus RTU
- SATEC ASCII
- DNP 3.0 (Level 2)
- IEC 60870-5-101 (optional)
- IEC 60870-5-104 (optional)
- Built-in
-
I/O Options
- 4DIOR - 4 digital inputs and 2 relay outputs with 1-cycle update time; unlatched, latched, pulse and KYZ operation; energy pulses, selection of solid state or electromechanical relays
- 12DIOR - 12 digital inputs, 4 relay outputs (including optional ETH port or additional RS485 port)
- 4AO - four optically isolated analog outputs with an internal power supply; selection of 0-20mA, 4-20mA, 0-1mA, ±1mA, 0-3mA, ±3mA, 0-5mA and ±5mA output; 1 cycle update time
- 8DI - eight digital inputs with 1-ms scan time
-
Software Support
- SATEC Power Analysis Software (PAS) for comprehensive configuration and data acquisition is available for download (free)
- SATEC Expertpower™ web-based energy management platform (subscription)
- Any 3rd party software supporting open-protocol
-
Display
- 3×2 in / 76×49 mm backlit LCD display
- Adjustable display brightness and update rate
- Auto-scroll option with adjustable page; autoreturn to a default page
- LED bar-graph displaying load as percentage of nominal load current (user-definable)
-
Meter Security
- Password security for protecting meter setups and accumulated data from unauthorized changes
-
Upgradeable Firmware
- Device firmware is easily upgraded through the serial or Ethernet port
-
Accuracy
- Complies with IEC62053-22, class 0.2S
- Meets ANSI C12.20-1998, class 10 0.5%
- Complies with IEC 61557-12 (PMD):
- Total Apparent Power 0.2%
- Total Active Energy 0.5/0.2%
- Total Reactive Energy 0.5%
- Frequency 0.05%
- Current 0.2%
- Neutral Current 0.2%
- Voltage 0.2%
- Power Factor 0.2%
- THDV, THDI 1%
-
-
Real-Time Clock
- Internal clock with 20-second retention time with battery backup
-
Unique Design
- Pass through CT connection
- Built-in auxiliary terminal for loose CT wires.
- Dual panel mounting: 92×92mm square or 4” round cutout
-